Racetorx Kawasaki ZX12R Gear shift support

£49.99

 

SKU: RTX559 Categories: ,

Description

We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles.

Our gear shift supports help prevent mis-shifts / false neutrals and provide a more positive gear change.

By moving the fulcrum closer to the gear lever, the kinetic energy is altered to achieve less effort and better action.
With the use of the installed needle bearing or phosphorus bronze bush, the rotational resistance is reduced.

-helps prevent mis-shifts / false neutrals
-provides safety and protection
-quick shifters work better with a gear shift support fitted (due to reduced play in the shaft)
-gain confidence back in gear changes
-provides positive gear changes
-added protection for your transmission in the event of a crash

This can also be used in conjunction with quick shifters for a more responsive gear change.

Stop the mis-shifts and false neutrals while adding some protection to your transmission with our one-of-a-kind gear shift supports.
Don’t settle for knock-offs and inferior products.

 

Material- 6061-T6 aluminium

Aesthetically pleasing with UV stable anodizing for corrosion protection.

Anodizing – Black Only

 

SPROCKET COVER to either be removed or the bottom right bolt area to be removed/cut a Dremel would do a nice job or a hacksaw then sand to a nice finish. , due to the sprocket cover being cast metal and still having 3 other bolts used the cover it will still be stable. 

Included– Gear shift support and bolts

Material- 6061-T6 aluminium

Aesthetically pleasing with hard anodizing for corrosion protection.

Anodizing – Hard anodizing in Black.

ZX12R – 2000 – 2002 A1
ZX12 – 2003 – 2006 B
While fitting the Gear shift support, be aware the sprocket cover metal plate will need to be cut, The bottom bolt location is where the gear shift support is mounted, this means the sprocket cover plate will be in the way. The top two bolts are enough to still mount the cover in place.

Kit Includes:

  1. Gear shift support (bearing/seal fitted)
  2. stainless steel Hardware included
  3. Blue grease for the bearing

Requirements-

  • It is essential to lubricate the bearing or phosphorus bronze bush bearing before application.
  • Mounting bolts to be torqued up to 10.7NM
  • We Recommend cleaning and regrease the needle bearing/bush every 3000miles or less
  • It is recommended to lock tight supplied bolts

FITTING SERVICE

We offer a fitting service at our workshop.

Location – Peterborough UK PE4

30 minutes will be all that is required to fit the gear shift support.

 

Additional information

Weight0.1 kg
Dimensions34 × 24 × 2.4 cm
Model

ZX12R – 2000 – 2002 A1, ZX12 – 2003 – 2006 B 

Make Model
Kawasaki All
Kawasaki Gear shift support

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Björn Meczynski
ZX12R

Added commentary to previous review.
The part works very good.
More tight and exact gearchanges.
No false neutrals.

Best regards,
Björn.

j
jenz shirra
Racetorx Kawasaki Zx12 gear shift support

Great design and Finnish. Precise fitment. Fast shipping and nicely packaged with stickers and lollies to chew on during installation! Works as described. A small but positive improvement to the gear change 👍

H
Henry Paga
Love the support

High quality and easy to install. The zx12 needs this shift shaft support. Especially if you have a lot of miles on your bike. Thank you

F
Frank Alvaro
I highly recommend.

Review on RaceTorx Gear Shift Shaft Support

Installed relatively easily, had to cut away a part (attached pic in comments) that holds the bottom right of the sprocket cover (mine had that bolt missing when purchased two years ago, so the lack of extra support didn’t bother me.

The finally got a ride in and boy oh boy, does the shift feel noice. The shift action up and down is smooth, almost like a tight click. Can clutchless downshift with more confidence now and blipping downshifts feel much better, more control and much more confidence.

This part simply supports the shaft at the case and it interested me that it could really do any more good, but the factory shaft mechanism must have some play, enough to notice a difference when the support is installed.

It felt like the shaft support doesn’t alone transform the gearbox, more so stabilises the shifting mechanism for smooth and controlled shifts.

I’m interested to continue riding under varying condition’s. Tonight was tight twisties, with lots of 1st and 2nd gear corners and nothing past 100kmph. Blipping downshifts we’re spot on!

Now, I still plan to install the Factory Pro Shift Star, which together with this support will bring the shifts up to spec, better than ever!

Add address